Installation of sandwich panels

Sandwich panels are a popular structural element that has a lot of advantages and is actively used in construction. The building material is universal, successfully used in the construction of shopping centers, garages, warehouses and other buildings. Among the advantages of such structures:

• affordable cost;
• possibility of installation under any weather conditions;
• installation efficiency;
• fire resistance;
• good sound insulation;
• long service life.

Despite the simplicity and high speed of assembly, it is important to observe all technological aspects. Otherwise, the design will not last long. Therefore, it is worth entrusting the installation of sandwich panels to the professionals of the An-Ta company, who have successfully commissioned dozens of objects, have a responsible approach to work.

Preparatory work

Before installing sandwich panels, it is important to complete the installation and fixing of the supporting structures on which the building material will be laid. Otherwise, the integrity of the block connection will be violated and the result will leave much to be desired. The material is lifted to the required height using a pneumatic gripper or in another way, fixed manually.

Sometimes it is necessary to cut the material into pieces, if this is required by the project. To do this, sandwich panel installers use a special tool:

• cantilever saw;
• jigsaw.

It is strictly forbidden to cut products with a grinder, as it tears the metal, damages the protective layer and paint.

Choice of mounts

Next, appropriate fasteners are selected, and the technology implies that the installation will be carried out exclusively on metal, it is highly undesirable to install the material on bare concrete walls.

Fasteners are bolts equipped with a rubber seal. The length of the products is selected based on the design. Fasteners are screwed in in strict accordance with the technology, taking into account the characteristics of the object, material and design. The specialists of our company know which fasteners to use on a particular object, they will perform the work efficiently, but quickly.

Installation of sandwich panels on walls and roofs

In the case of walls, the steps will be as follows:

1. Calculation of the number of fasteners, measurements.
2. Delivery of products to the place of fastening.
3. Wall mounting from plinth
4. Thermal padding.
5. Fixing each block.
6. Processing of ends and nodal connections.
7. Removing the protective coating from the material and cleaning.

For roofing:

1. Work starts from the edge of the roof.
2. They make an overhang of 300 mm, cutting off part of the sheet and removing the cotton wool.
3. Alternately lay out the material, making small gaps at the joints.
4. Carry out fixation based on the plan.
5. Carry out fastening of finishing elements, if necessary.
6. Remove protective film and clean.

These are just the basic points of technology, and there are a lot of nuances in the work itself. For example, when laying a roof covering, installers must wear light shoes so as not to damage the sandwich panel assembly.

An-Ta professionals have been successfully working with these materials for many years, they are well aware of the structure of the material and the subtleties of its installation. We offer affordable prices for work, we guarantee efficiency and strict observance of deadlines.